Filter
Top Products
5
Settings
38
To Turn Backlight On/Off:
1. Press and hold the
[walk test] key for 2 seconds
until you hear two beeps.
When prompted, enter the
master user code.
2. Press the
key five
times. If your backlighting
is off, you see:
BACKLIGHT OFF
Byp=OK Home=CHG
3. To set the backlight to shine
continuously, press the
key. To set the back-
light shine only when the key-
pad is in use, press the
key.
4. To exit, press the
key.
Whenever you use your key-
pad, a light automatically illumi-
nates the display and keys.
This backlight shuts off 60 sec-
onds after you have finished us-
ing the keypad.
If you wish, you can set the
backlight to shine continuously.
This makes it easier for you to
notice system messages, espe-
cially if your keypad is located
in a dark area.
If you turn the backlight on, you
can turn it off again by repeat-
ing the procedure to the right.
How to Turn the Backlight On/Off