Filter
Top Products
3
Arm/ Bypass
19
Exit Delays
An exit delay is the amount of time you have to exit and secure
the building, once your security system begins to arm. These
delays last from 20 to 255 seconds, depending upon how your
system was programmed.
During the exit delay, the Arm LED blinks. The keypad may beep
during the delay; if so, it beeps
faster during the last ten sec-
onds. As shown to the right, a
bar appears at the base of the
display. This bar represents the
amount of time you have to exit
and secure the building.
When half of the time has ex-
pired, the bar will be half its
original length.
EXIT NOW!
EXIT NOW!
Any arming command with an
exit delay may be canceled be-
fore the system is armed. To
cancel an arming sequence,
enter a user code during the exit
delay.
To Cancel an
Arming Sequence:
You see:
1. Enter your user code.
Canceling an Arming Sequence
EXIT NOW!