Filter
Top Products
6
WARNING-DO NOT INSTALL OR USE A CRICKET IN
AN INSTALLATION WHERE THERE HAS PREVIOUSLY
BEEN A CHIMNEY FIRE WITHOUT FIRST HAVING AN
INSPECTION BY A CERTIFIED CHIMNEY SWEEP.
II. FIREPLACE INSERT INSTALLATION
A. Installation into a Factory-Built Fireplace
Your Cricket has been tested by Warnoch-Hersey
International for installation in the following SPECIFIED
zero clearance fireplaces (ZCF) which are furnished with
an 8" minimum listed chimney system. The Cricket must
be installed in a ZCF with the rear manifold and blower
option.
Heatilator Models 3036, 3038, 3130, 3138, 3336R,
3336L, 3042, 3048, 3342R, 3342L, HE36BG, HE42B,
HE28B, TD36A, TD36B, TD42B, TD46BI, HF42A, HF36A,
Mark 123, HB36, AM, NA42-A1
Majestic Models M28, M36, M36AO, M42, L-36, L-36B,
L-42, L-42R, L-42L, L-42B, MD-36, MD36AO, MD-36R,
MD-36L, M.H.C.36, MBUC36, MBUC42, MRC36, RC36,
WMII-36, WMII-42, MFC-36, MEC-36A, MEC-36F, MECB-
36, MBC-36A, MB-42, MBU-36, MD-42, MD-42AO, MHC-
28, MHC-42
Marco Models 36-X, 36-1X, 36N-X, 36NI-X, DWF-36CF,
DWF-36GO-X, DWF-36C, DWF/DF41-D, DWF/DF41-F,
DWF/DF41-GO, DWF-36DR,FR,FL,DL,-3,DWF-
31D,DWF-31GO,DWF-36ST,036,B41-HC
Preway Models DW36, DW36A, DL36DW, DW42, FF42,
DL42DW, BE48, PB48, FF48, BE41, FF41, BE41ST,
B142D, FF36, B136SEM, DL360A5, BE41SEM, B136D-
3M, B136D, DL36DOA, PB4250, DL36D, SL36PB
Martin Models BC3642, BC3642M, BB3642, BB3642C,
A39, AC39, A33, AC33, A/AC36, A42, AC42, DBB36,
DBC36, BW36B, BW42B, B-36, C-36, C-36M, DBB361,
DBC361, M42, M36, BB4250, BB4250C, BC4250,
BW4245A, LF36B
Superior Models SP38C-1, RD-3300, RD-3800, RD-
4300, RC-3310, RC-3310, PC-3310, PC-3810, RC-4310,
HC 3320, HC-3820, HC-4320, HCE-3550, HCE-4050,
HCE-4550, CF-3860, and Hearthstar Fireplace 33A, 33B,
38A,38B,43A,43B,35B-N,38H, 40B-N, 45B-N, 3800 Series
Temco Models 36-5, TBF42-2RSA, EE36-1
Your ZCF must be sound and in good operating condition.
The chimney should be cleaned before installation if
necessary. Inspection by a local building official, fire
marshal, certified chimney sweep, or other qualified
personnel is recommended.
Your ZCF MUST have been installed in accordance with
the manufacturer’s specifications and to all local building
codes.
Installation:
1. Check your fireplace dimensions - 25" wide in front, 20"
wide in back, 18" deep and 19" high. (See figure 1)
2. The fireplace’s ash lip, smoke shelf, smoke baffle, and
firebrick may be removed if necessary. The damper
must be removed.
3. Check proper clearance to combustibles as shown in
Figures 2 and 3.