Filter
Top Products
-15-
Figure 14. 5-Micron primary filter.
Figure 15. 1-Micron secondary filter.
Figure 16. Air cleaner housing.
To change and service the filters, do these steps:
1. Unplug the air cleaner unit.
2. Move the filter retainer latch upward, remove
the primary filter and discard it. See Figure 14.
3. Remove the secondary filter and shake out the
wood dust until clean and/or wash out with warm
water and let dry. See Figure 15.
4. Vacuum out the inside of the air cleaner housing.
See Figure 16.
5. Reinstall the secondary filter when it is dry and
install a new primary filter.
6. Move the filter retainer latch downward to
lock all the filters in place.
MAINTENANCE
Filters
The amount of use has a direct bearing on when
you must change the primary air filter and service
the secondary air filter. Contact your
SHOP
FOX
®
dealer for other possible filter types
available.
Keep the air cleaner unit
unplugged during all
maintenance procedures.
Ignoring this warning may
result in serious personal
injury to you or others!
Always wear a dust mask
and safety glasses when
servicing and changing
filters. Sawdust may
cause allergic reactions
or respiratory problems.
NOTICE
DO NOT use compressed air to blow out the
secondary filter. If you do, you will damage
the filter and reduce filtering quality.
Filter Retainer Latch
MAINTENANCE