Filter
Top Products
20
ENGLISH
Cylinder Exhaust Port
Level 3.
shredder blade
Level 1.
WARNING
Never remove vacuum tube or open fan guard when Shredder
Vac is running or serious personal injury may result. Always wear
heavy-duty work gloves when working in shredder blade area.
1. With engine stopped, remove spark plug wire, loosen clamp and
pull vacuum tube from unit.
2. Remove accumulated debris from blade and inspect for damage.
IMPORTANT
Do not operate Shredder Vac if shredder blade is damaged or broken.
Return unit to Shindaiwa Dealer for service.
3. Install vacuum tube. Refer to “Installing Vacuum Tube” (page 9)
in assembly section for correct assembly procedures.
debrIs baG
Level 1.
Parts Required: None
Shake dust from bag and inspect for hole or tears. Inspect zipper and
clean debris from teeth to assure complete closing of zipper.
IMPORTANT
The cylinder exhaust port must be inspected and cleaned of excess
carbon every 3 months or 90 hours of operation in order to main-
tain this engine within the emissions durability period. Shindaiwa
strongly recommends that you return your unit to your Shindaiwa
dealer for this important maintenance service.