Filter
Top Products
54
Error Recovery
1. Data clear operation
With the data clear operation, you can clear various item memories when necessary.
This operation should be done only when the master or system breaks down.
(1) Data clearing of the T-LOG buffer — master and satellite
You can clear the T-LOG buffer in the event there is some trouble and the terminal’s
memory requires clearing. This function is available at the master and satellites.
Clearing procedure
1.
Turn the mode switch to the PGM2 position.
2.
Select “DATA CLEAR” and press the [ENTER] key.
3.
Select “T-LOG” and press the [ENTER] key.
5
NOTE
•
For T-LOG polling, see page 14.
•
The above-mentioned data clearing jobs should be performed at the advice of your
authorized SHARP dealer.