Filter
Top Products
ENGLISH
ENGLISH
Thank you for purchasing this SHARP Plasmacluster Ion Generator. Please
read this manual carefully before using Plasmacluster Ion Generator.
After reading, keep the manual in a convenient location for future reference.
E-1
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS
...............
E-2
• WARNING
...............................................................
E-2
• CAUTIONS CONCERNING OPERATION
......................
E-2
• INSTALLATION GUIDELINES
......................................
E-2
PARTS NAME
........................................................
E-3
• FRONT
.................................................................................
E-3
• BACK
...................................................................................
E-3
INSTALLATION POSITION
...........................................
E-4
OPERATION
......................................................................
E-4
CLEANING AND MAINTENANCE
.............................
E-5
• MAIN UNIT
...........................................................................
E-5
• FILTER
.................................................................................
E-5
PLASMACLUSTER ION GENERATING UNIT REPLACEMENT
....
E-6
HOW TO REPLACE THE PLASMACLUSTER ION GENERATING UNIT
....
E-7
SPECIFICATIONS
............................................................
E-8
TROUBLESHOOTING
....................................................
E-8
• While IG-A10E can inactivate and eliminate suspended viruses
and other contaminants, it cannot create a completely sterile
environment. SHARP does not guarantee its ability to prevent
microbial infection.
• To enable stable emission of high-density Plasmacluster ions, the
Plasmacluster Ion Generating Unit mounted in IG-A10E will need
to be replaced periodically*
.
* Replacement is required approximately every 2 years (17,500 hours) when operated
24 hours a day. IG-A10E will stop operating after about 26 months (19,000 hours) if
the Plasmacluster Ion Generating Unit is not replaced.