ENGLISH
FRANÇAIS
ESPAÑOL
FEATURES
Plasmacluster Ion Control
The unit controls the ratio of negative ions and
positive ions depending on the condition of
the room.
• Clean Mode
Approximately the same numbers of positive
and negative ions are discharged.
• Ion Control Mode
Plenty of negative ions exist in natural
surroundings such as waterfalls or forests. In
this mode, negative ions will be released at
an increased rate, in order to bring the room
air close to this natural environment.
• AUTO Plasmacluster Ion Mode
The unit will switch between Clean Mode and
Ion Control Mode automatically depending
on the amount of impurities in the air detected
by the odor sensor.
• NIGHT Mode
The fan speed is automatically switched
between NORMAL and SILENT, depending
on the amount of impurities in the air.
The Plasmacluster Indicator Light and Clean-
Sign Light will turn off.
• Filters
1) Pre-Filter
It collects large particles.
2) Washable Active Carbon Filter
Absorbs odor elements.
Washable to maintain optimum
deodrization performance.
3) True HEPA (High Efficiency
Particulate Air) Filter with Micro-
bial Control Filter
High-efficiency particle collection including
pollen and dust.
CONTENTS
FOR CUSTOMER ASSISTANCE(U.S) .....
E-2
CONSUMER LIMITED WARRANTY(U.S)....
E-3
FOR CUSTOMER ASSISTANCE(CANADA) ...
E-4
LIMITED WARRANTY(CANADA) ......... E-5
IMPORTANT SAFETY INSTRUCTIONS ..
E-6
• WARNING ..................................................E-6
• CAUTIONS CONCERNING OPERATION .E-7
• REMOTE CONTROL LIMITATIONS ..........E-7
• INSTALLATION GUIDELINES ...................E-7
• FILTER GUIDELINES ................................E-7
PART NAMES........................................ E-8
• MAIN UNIT DISPLAY .................................E-8
• INCLUDED.................................................E-8
• BACK .........................................................E-8
PREPARATION...................................... E-9
• INSERTING BATTERIES
IN THE REMOTE CONTROL ....................E-9
• REMOTE CONTROL USE .........................E-9
• FILTER INSTALLATION .......................... E-10
OPERATION ........................................ E-12
• MAIN UNIT OPERATION ........................ E-12
• REMOTE CONTROL OPERATION ........ E-14
CARE AND MAINTENANCE ............... E-15
• MAIN UNIT.............................................. E-15
• ODOR SENSOR ..................................... E-15
• FILTER CLEANING................................. E-15
• WASHABLE ACTIVE CARBON
FILTER CARE ......................................... E-16
• FILTER REPLACEMENT
GUIDELINES .......................................... E-17
TROUBLESHOOTING......................... E-18
SPECIFICATIONS ............................... E-19
E-1
ENGLISH
Declaration of Conformity
SHARP AIR PURIFIER FP-P60CX
This device complies with Part 18 of FCC rules.
Responsible Party:
SHARP ELECTRONICS CORPORATION
Sharp Plaza,
Mahwah, New Jersey 07430-2135
TEL: 1-800-BE-SHARP
Declaration of Conformity
SHARP AIR PURIFIER FP-P60CX
This ISM device complies with Canadian ICES-
001
Responsible Party:
SHARP ELECTRONICS OF CANADA LTD.
335 Britannia Road East Mississauga, Ontario
L4Z 1W9 Canada
TEL: (905) 568-7140
Thank you for purchasing the SHARP Air Puri-
fier. Please read this manual carefully for the
correct usage information. Before using this
product, be sure to read the section: “Important
Safety Instructions.”
After reading this manual, retain it in a conven-
ient location for future reference.