Filter
Top Products
OPERATION
MAIN UNIT OPERATION
Plasmacluster Indicator Light
MODE Selection Button
E-12
Power ON/OFF Button
AUTO operation
The fan speed is automatically switched
(HIGH*, MEDIUM, SILENT) depending
on the amount of impurities in the air.
The sensors detect the impurities for
efficient air purification.
QUICK CLEAN operation
The unit will operate at HIGH* fan speed
for 15 minutes, then will operate at Auto
operation.
The operation mode is effective when
quick removal of impurities in the air is
desired.
POLLEN mode operation
The unit will operate at HIGH* fan speed
for 10 minutes, then will alternate
between MEDIUM and HIGH* for 20
minutes.
10 minutes: HIGH fan speed
20 minutes:
MEDIUM fan speed
20 minutes: HIGH fan speed
Main Unit Controls
• AUTO
• QUICK CLEAN
• POLLEN
• SILENT
• MEDIUM
• MAX
CLEAN-SIGN Light
Power ON/OFF Button
• Used to start operation (short beep) and stop operation (long beep)
• Plasmacluster Indicator Light and Fan Speed Indicator Light turn on/off.
• Unless the power cord is unplugged, the operation starts in the previous mode the
unit was operated in.
MODE Selection Button
• The operation mode can be switched.
* HIGH fan speed is an interme-
diate speed between MEDIUM
and MAX.
1
2
MEDIUM operation
The unit will operate at a fan
speed of MEDIUM.
MAX operation
The unit will operate at a fan
speed of MAX.
SILENT operation
The unit will operate quietly
using minimal air intake.
CLEAN Filter Indicator Light