ENGLISH
FEATURES
Plasmacluster Ion Control
The unit controls the ratio of negative ions
and positive ions depending on the con-
dition of the room.
• Clean Mode
Approximately the same numbers of posi-
tive and negative ions are discharged.
• Ion Control Mode
Plenty of negative ions exist in natural
surroundings such as waterfalls or forests.
In this mode, negative ions will be re-
leased in an increased rate, in order to
bring the room air close to this natural
environment.
• AUTO Plasmacluster Ion Mode
The unit will switch between Clean Mode
and Ion Control Mode automatically de-
pending on the amount of impurities in the
air detected by the dust and odor sensor.
• Filters
1) Pre-Filter
It collects large particles.
2) Washable Active Carbon Filter
Its deodorizing performance can be
maintained by washing.
3) True HEPA (High Efficiency
Particulate Air) Filter with anti-
bacterial Apatite Filter
High-efficiency particle collection in-
cluding pollen and dust.
CONTENTS
• FOR YOUR PROTECTION (U.S.) ...............E-2
• CONSUMER LIMITED WARRANTY (U.S.) .E-3
• FOR YOUR PROTECTION (CANADA) .......E-4
• LIMITED WARRANTY (CANADA) ...............E-5
SAFETY PRECAUTIONS ........................ E-6
• RISK OF ELECTRIC SHOCK ......................E-6
• CAUTIONS CONCERNING THE
OPERATION OF THIS PRODUCT ..............E-7
• REMOTE CONTROL LIMITATIONS ............E-7
• INSTALLATION GUIDELINES .....................E-7
• FILTER GUIDELINES ..................................E-7
PART NAMES .......................................... E-8
• MAIN UNIT DISPLAY ...................................E-8
• BACK ........................................................ E-10
• ACCESSORIES ........................................ E-10
PREPARATION...................................... E-11
• INSERTING BATTERIES
IN THE REMOTE CONTROL .................... E-11
• REMOTE CONTROL USE .........................E-11
• FILTER INSTALLATION ............................ E-12
OPERATION .......................................... E-14
• MAIN UNIT OPERATION .......................... E-14
• REMOTE CONTROL OPERATION .......... E-15
CARE AND MAINTENANCE ................. E-16
•WASHABLE ACTIVE CARBON
FILTER CARE ........................................... E-16
• FILTER CLEANING................................... E-17
• MAIN UNIT................................................ E-18
• ODOR SENSOR, DUST SENSOR ........... E-18
• FILTER REPLACEMENT
GUIDELINES ............................................ E-19
OPERATION GUIDE.............................. E-20
TROUBLE SHOOTING.......................... E-21
SPECIFICATIONS ................................. E-22
Thank you for purchasing the SHARP FP-
N60CX. Please read this manual carefully for
the correct usage information. Before using this
product, be sure to read the section: “Safety
Precautions.”
After reading this manual, retain it in a conven-
ient location for future reference.
This product is for household use only.
E-1
FILTER MAINTENANCE
Some odor ingredients absorbed by
the filters may become separated and
may be discharged through the air
outlet and result in additional odor.
Depending on the usage environment,
the air outlet odor may become strong
after several months.
In this case, clean the Washable Ac-
tive Carbon Filter. (Refer to E-16)
If this odor persists, this is because
the odor components absorbed by the
HEPA Filter have come off the filter.
Purchase the optional filter FZ-
N60HFU and replace the original fil-
ters.
ENGLISH