Sharp FP-N60CX Air Cleaner User Manual


 
ENGLISH
6
Dry the filter out-
doors if possible in
a well ventilated
area.
CAUTION
Let the filter dry thoroughly.
If used while the filter is still moist, then the air
that is exhausted from the main unit will have
an odor. It may take 1 or 2 days to dry.
Dry the filter outdoors in a well ventilated area.
If dried indoors, it may give an odor. In addi-
tion, the water dripping off the filter may soil
your floor.
Make sure that the activated carbon has not
shifted to one side inside the filter. If it has, dis-
tribute it evenly with your fingers.
Dry the filter as shown in the above illustration.
The wet filter is heavy. Fix it securely for drying
to make sure it does not fall down.
The filter takes longer to dry in winter, on rainy
days. Wash it on a day when the weather is
good and dry it in the sun.
Move it indoors at night to prevent freezing.
7
Reinstalling the Filter and Restart
Reinstall the filter as shown on Page E-13.
The filter air may have an odor until the filter is
completely dry.
8
Once the Washable Active Carbon
Filter has been cleaned, connect the
power cord to the outlet and use a
pointed instrument to activate the Fil-
ter Reset Button on either the Remote
Control or the Main Unit.
(Refer to page E-8,E-9,E-15)
Once the Filter Reset
Button has been ac-
tivated, you will hear
a beep sound that
means that the unit
has been reset.
The Filter indicator
light will then go out
automatically.
If you press the Fil-
ter Reset Button on
the main unit, re-
move the front panel
first.
FILTER CLEANING
Clean the top surface of the Pre-Filter
lightly with a vacuum cleaner.
NOTE
The True HEPA Filter is damaged eas-
ily. Do not bring it into direct contact
with the nozzle of a vacuum cleaner or
wash it with water. The True HEPA Fil-
ter should never be washed or cleaned.
Pre-Filter
E-17
FILTER RESET
OFF
TIM
ER
POW
ER ON/OFF
Filter Reset Button