Filter
Top Products
EN-24
MAX DENSITY OPERATION
The unit releases max density Plasmacluster ions. By continuously discharging "extra high"
airow for 30 minutes, the unit effectively.
1
Press the MAX DENSITY button during Ion
generator operation.
• The remote control will display " ".
• The red MAXIMUM lamp will light.
TO CANCEL
Press the MAX DENSITY button again.
• The red MAXIMUM lamp will turn off.
NOTES:
• You cannot set the fan speed during MAX DENSITY opera
-
tion.
• The MAX DENSITY operation will be automatically can
-
celled in 30 minutes, and the unit will return to the original
settings.
• MAX DENSITY operation and REFRESH operation can not
be used together.
USE FOR ION GENERATOR
TO CHANGE AIR FLOW DIRECTION
UP / DOWN AIR FLOW DIRECTION
1
Press the LOUVERS button.
• The horizontal louvers will swing.
2
Press the LOUVERS button again to stop
the desired position.
CAUTION:
Never attempt to adjust the horizontal louvers manually.
• Manual adjustment of the horizontal louvers can cause the
unit to malfunction when the remote control is used for ad-
justment.
LEFT / RIGHT AIR FLOW DIRECTION
Hold the vertical louver as shown in the diagram
and adjust the air ow direction.
1
2
1
CV-2P10SC_en.indd 24 11.3.22 11:00:18 AM