Sharp AY-ZP48LZ Heat Pump User Manual


 
4
SET CURRENT CLOCK TIME
There are two clock modes: 12-hour mode and
24-hour mode.
Example: 5 o’clock in the afternoon
Clock Display
12-hour mode PM 5:00
24-hour mode 17:00
1
To set to the 12-hour mode, press the
CLOCK button once.
To set to the 24-hour mode, press the
CLOCK button twice.
2
Press the TIME ADVANCE or REVERSE
button to set the current time.
Keep the button pressed to advance or
reverse the time display quickly.
3
Press the SET/C button.
• The colon (:) blinks to indicate that the clock is
functioning.
NOTE:
• The current time cannot be set when the timer is
operating.
LOADING BATTERIES
Use two size-AAA (R03) batteries.
1
Remove the remote control cover.
2
Insert batteries, making sure the (+) and
(
-
)polarities are correctly a lign ed.
3
Replace the cover.
4
Press the RESET Button.
• The display indicates “AM 6:00” when
batteries are properly installed.
NOTE:
• The battery life is approximately one year in
normal use.
• Replace the batteries when the remote control
displays "
".
• When you replace the batteries, always change
both batteries, and make sure they are the same
type.
• If the remote control does not operate properly
after replacing the batteries, press the RESET
button.
• If you will not be using the unit for a long time,
remove the batteries from the remote control.
HOW TO USE THE REMOTE CONTROL
Point the remote control towards the unit’s signal
receiver window and press the desired button. The
unit generates a beep when it receives the signal.
• Make sure there is no object between the remote
control and the unit.
The signal effective distance is 7m.
CAUTION:
• Do not expose the receiver window to direct
sunlight. This may adversely affect its operation.
• Use of certain uorescent lamp in the same room
may interfere with transmission of the signal.
• Do not leave the remote control in direct sunlight
or near a heater. Protect the unit and remote
control from moisture and shock.
USING THE REMOTE CONTROL
3
2
1
Cover