Sharp AY-ZP48LZ Heat Pump User Manual


 
10
1
.
2
.
3
.
5h OFF TIMER
When the 1
.
2
.
3
.
5h OFF TIMER is set, the unit will
automatically turn off after the set time (hours).
1
Press the 1
.
2
.
3
.
5h OFF TIMER button to
set the desired time.
• The time setting will change as you press the
button as follows.
The orange TIMER lamp (
) on the unit will
light up.
The remaining operation time will be indicated
on the remote control in 1-hour increments.
TO CANCEL
Press the TIMER CANCEL (SET/C) button.
Alternatively, press the 1
.
2
.
3
.
5h OFF TIMER
button.
• The orange TIMER lamp ( ) on the unit will
turn off.
NOTE:
• The 1
.
2
.
3
.
5h OFF TIMER operation has priority
over TIMER ON and TIMER OFF operations.
If the 1
.
2
.
3
.
5h OFF TIMER is set while the unit is
not operating, the unit will operate at the formerly
set condition.
If TIMER ON and/or TIMER OFF are set, TIMER
CANCEL button cancels every setting.
TIMER OPERATION
TIMER OFF
1
Press the TIMER OFF ( ) button.
2
The TIMER OFF indicator will blink;
press the TIME ADVANCE or REVERSE
button to set the desired time.
(The time can be set in 10-minute increments.)
3
Press the TIMER SET (SET/C) button.
• The orange TIMER lamp ( ) on the unit will
light.
TIPS ABOUT TIMER OFF OPERATION
When the TIMER OFF mode is set, the temperature
setting is automatically adjusted to prevent the
room from be coming excessively warm or cool, for
example while you sleep. (Auto Sleep function)
HEAT mode
• One hour after the timer operation begins, the
temperature setting drops 3°C lower than the
original temperature setting.
COOL/DRY mode
• One hour after the timer operation begins, the
temperature setting rises 1°C higher than the
original temperature setting.
1
3
2
1
CANCEL