Filter
Top Products
17
HIGH COOL
MED COOL
LOW COOL
FAN ONLY
• The time setting will change as you push the button. The
display will change as follows;
• The last OFF time setting is memorized by the unit and
will appear on the display when the button is pushed.
• The timer will be set, 5 seconds after the SET TIMER /
OFF button is pushed for the last time.
• If you wish to cancel the timer, push the SET TIMER /
OFF button again after the time is set or, push the SET
TIMER / OFF button until CL (cancel) appears on the
display. A double beep will sound when the timer is
cancelled.
0.5h
1.0h
1.5h 10h
Preset(0.5h)
Previous setting
11h12h
CL(cancel)
TEMP.
TEMP.
---Raise temp. setting 1°F at a time.
---Lower temp. setting 1°F at a time.
POWER
TEMP.
TEMP.
SELECTOR
SET TIMER/OFF
ON/OFF
HOW TO OPERATE
OPERATING WITH THE REMOTE CONTROL
TRANSMITTER
TEMPERATURE setting button
POWER ON / OFF button
SELECTOR button
Push to start or stop the operation.
Push to change fan speed, or to select
fan only mode.
Fan speed selections are shown to the
right.
SET TIMER / OFF button
Push to set delay "OFF" timer during operation.
To Change the Temperature Setting When the ON / OFF Timer Is In Use
Push a TEMPERATURE setting button.
The current set temperature will be recalled on the unit's display.
Use the TEMPERATURE setting buttons to set the new temperature.
The new set temperature will show on the display for 5 seconds and return to the
time display.
1.
2.
NOTE:
• The "ON" TIMER cannot be set
with the remote control.
It can only be activated by the
TIMER ON/OFF pad on the unit's
control panel ( See page 14 ).