Filter
Top Products
2
TOLL FREE: 1-800-798-7398
Getting Started
A Backsaver handle
B Lower Pole
C Steam Mop
D 2 All-Purpose Cleaning Pads
E Filling Flask
F Funnel
G Steam Button
ASSEMBLY
1 Remove all the parts from the
package. Verify all the listed parts
are included.
2 Insert the lower pole into the
Backsaver handle as shown. (fig. 1)
3 Insert the assembled pole into the
base of the steam mop. Gently push
down on the pole until you hear it
click into place. (fig 2)
When assembling your steam mop there
may be a little water in or around the
water tank. This is because we test all
our steam mops 100% before you buy
them, so you get a quality Shark
®
Steam
Mop.
fig. 1
fig. 2
A
D
B
E
F
C G
fig. 3