Shark S3901K N Carpet Cleaner User Manual


 
14
TOLL FREE: 1-800-798-7398
Using Your Removable Handheld Steamer
with Flat Scrubber
Cleaning Tip: The Flat Scrubber is designed for cleaning a variety of surfaces and is
exceptional on those that are large and flat including counter tops, table tops, walls
mirrors, windows, stairs, shelves and other similar surfaces. Super absorbent bonnet
loosens, lifts, and locks in dirt and grime while sanitizing at the same time.
4 To remove the Flat Scrubber Tool, press and hold
down the Accessory Hose release button. Then
slide out the Flat Scrubber Tool. (fig. 25)
CAUTION: Do not press the steam trigger
while attaching or removing the Flat Scrubber
Tool.
CAUTION: Do not use the Flat Scrubber Tool
without the All-Purpose Scrubber Pad attached.
fig. 23
fig. 24
fig. 25
1 To attach the All-Purpose Scrubber Pad, place
the pad exterior side down on a flat surface
(lavender tab indicates the bottom of the pad)
and insert the top of the Flat Scrubber Tool into
the top portion of the pad and then pull the pad
over each side of the back edge.
2 Press the Flat Scrubber Tool onto the Accessory
Hose until it clicks into place. (fig. 23)
3 Select either DUST, MOP or SCRUB mode by
pressing the ON/STEAM SETTING button and
wait until the selected setting indicator light
turns solid blue. Hold down the steam trigger to
start steaming. (fig. 24)
S3901K_N_11_IB_E_120410_3.indd 14 12-04-10 11:40 AM