Filter
Top Products
6
TOLL FREE: 1-800-798-7398
Using Your Steam Pocket
®
Mop
IMPORTANT: Do not use the mop
without first attaching a micro-fiber
pocket and adding water to the tank
first. When you are using the mop
for the first time, it might take longer
than the normal 30 seconds to start
steaming. Just pump the handle a
few times in a downward motion to
prime the pump and it should be
ready.
2 Pump the handle a few times in a
downward motion. This pumping
action will release steam as you
mop and allows you to customize
the amount of steam you want.
Begin mopping with a forward
and backward motion. The natural
motion of mopping will produce
steam.
NOTE: Make sure the floors are
swept or vacuumed before using the
steam mop.
1 Pull and twist the quick release cord
holder to unwrap the power cord
completely.
Plug into a 120-volt electrical outlet
The power “On” light will turn blue. It
takes approximately 30 seconds for
the mop to heat up and for the steam
to be ready.
2
1