Filter
Top Products
2
TOLL FREE: 1-800-798-7398
3
www.sharkclean.com
English
Getting Started Mode 1: Hand Vac with Connections
g 2-in-1 Crevice/Dusting Tool
h Pet Hair Power Brush
i AirDam(HandVacMode)
j Filters
TECHNICAL SPECIFICATIONS
Voltage: 120V., 60Hz.
Power: 800 Watts
a Hand Vacuum
b Flexible Stretch Hose
c Backsaver™ Handle
d HoseMount
e Backsaver™ Wand
f Shark™ Widebrow Floor Nozzle
with Swivel Steering
h
g
b
d
j
i
c
e
f
a
STANDALONE HAND VAC
You can use the standalone Hand
Vac for spot-cleaning, and large
particle pick-up.
1 Slide pointed ends of Air Dam
(U-shaped bracket) into tracks on
either side of the inlet opening on the
bottom of the Dust Cup. Press firmly
to ensure that Air Dam is in place.
2 When ready to vacuum, make sure
all three wheels are resting on the
ground. This allows the Air Dam to
guide debris to inlet opening.
3 While holding Hand Vac, press
Power Button to begin cleaning.
Hold Hand Vac to turn off the
Power Button.
5 Empty Dust Cup after cleaning and
periodically during cleaning when
itappearsfull.(See“Maintenance”
section for instructions.)
CAUTION: The Power Button for
all three modes is on the Hand Vac
handle. Always turn the power OFF
before plugging and unplugging,
when adding or removing
attachments, or when connecting
Hand Vac to or from the
Backsaver™ Wand.
1
2
3