Filter
Top Products
14
TOLL FREE: 1-800-798-7398
15
www.sharkclean.com
English
Storing Your Multi-vac Maintenance
STORAGE
YourMulti-Vaccanbestoredasa
compact unit with the Hand Vac
attached(see“Mode3:StickVac
Assembly”):
1 Wrap cord around cord holders and
secure plug.
2 Grip Backsaver™ Handle and roll unit
to storage area. Press Backsaver™
Handle Release Button to unlock top
section of Backsaver™ Handle.
3 Guide top section of Backsaver™
Wand forward toward the canister.
4 Roll into storage area.
NOTE: Empty dustcup prior
tostoringyourMult-Vac(see
maintenance section for instructions)
TO EMPTY DUST CUP:
Regardless of what mode you
use, the Dust Cup needs to be
emptied each time you vacuum and
periodically during cleaning, when
the dust cup appears full.
NOTE: If Hand Vac is attached to
Hose and Backsaver™ Wand in Stick
Vac mode, remove Hand Vac first
before emptying contents.
1 Hold Hand Vac upright.
2 Press Dust Cup Release Button to
remove door. Lift door off hinges
and set door aside.
3 Turn Dust Cup over a trash
receptacle and tap gently to empty
contents.
4 Hold Hand Vac upright once again.
5 Set bottom hinges of Dust Cup door
into guides first; then snap door shut.
6 Check to make sure door is secure
before turning on Hand Vac.
3
1
3
1