Filter
Top Products
Precision Comfort™ Owners Manual
14
Sleep Number
®
MATTRESS INSTALLATION
EXERCISE EXTREME CAEXERCISE EXTREME CA
EXERCISE EXTREME CAEXERCISE EXTREME CA
EXERCISE EXTREME CA
UTION WHENUTION WHEN
UTION WHENUTION WHEN
UTION WHEN
USING UTILITY KNIFE!USING UTILITY KNIFE!
USING UTILITY KNIFE!USING UTILITY KNIFE!
USING UTILITY KNIFE!
THE DANGER OF
SERIOUS FINGER CUTS ARE POSSIBLE IF
UTILITY KNIFE IS NOT USED CORRECTLY.
8. At each threaded lug location, make a
small cut (no larger than 1/4” long) through
the mattress cover fabric with a utility knife
(FIGURE 15).
9. Position a large plastic washer over each
cut in the mattress cover fabric (FIGURE
15).
10. Position a metal washer over each plastic
washer (FIGURE 15).
11. Insert one of the mounting bolts through
both washers and screw into one of the
mounting lugs. Snug fit...Do not
overtighten!
12. Insert the other mounting bolt per Step 11.
13. Complete mattress setup per the Sleep
Number
®
installation instructions. This will
include fitting the base pad, air chambers,
center wall and topper pad.
14. Position and zip the top panel to the Sleep
Number
®
mattress cover to complete
installation.
SLEEP NUMBER
®
MATTRESS HARDWARE
AND COMPONENTS VARY PER MODEL.
NOTE