Filter
Top Products
NEW
NEW
EAP-5D1Q One Output, 5A@12VDC (4.5A@24VDC)
Features :
AC power-failure supervision relay.
Battery-failure supervision relay.
Selectable 2.2 kOhm End-of-Line (EOL) resistor
for AC-failure and battery-failure supervision relays.
Selectable delay timer (5 seconds, 5 minutes,
5 hours) for AC-failure supervision relay.
LED overload indicator and automatic shutdown for
short-circuit protection.
Over-current fuse-protected AC input.
Built-in backup battery charger.
Automatically switch to backup battery if AC fails.
Individual AC input and DC output LED status
indicators.
Power:
Field-selectable 12 or 24 VDC output.
Operating voltage input: 110~240 VAC.
Adjustable output voltage range (11~15 VDC,
23~26 VDC) to compensate for voltage drops.
Supply current: 5A@12VDC, 4.5A@24VDC.
AC input fuse rating 3.15 Amp (glass fuse).
DC output overload sensing with red LED indicator
and automatic shutdown during short circuit.
Enclosure:
Heavy-duty steel case to protect the power
connections.
Removable steel cover for easy access.
Ventilation holes to prevent heat buildup.
Enclosure has enough room for two 7AH batteries.
6ft (1.8m) Power cord and battery leads included.
7 3 9
Dimensions: 12 /16”x12 /16”x3 /16” (316x310x90 mm).
Knockout on the cover for optional cam lock.
Access Control Power Supply
7 3
Dimensions: 12 /16 12 /16
(316x310x90 mm)
9
"x "x3 /16"
EAP-5D1MQ Power Supply Board
+
-
AC input LED
status indicator
AC input fuse
DIP switch
for 12 or 24 VDC
output selection
VR1 rotary knob
for DC output
voltage range
adjustment
AC failure
delay timer
DIP switch
End-of Line
(EOL) 2.2 kOhm
resistor DIP switch
Battery presence
and low battery
monitor DIP switch
DC output
terminal block
12 VDC Battery
(Optional)
Back-up
battery terminal
DC output LED
status indicator
AC failure Supervision
Relay Output to
Audio/Visual
warning device
Power Supply
Power Supply
Battery failure & low battery
Supervision Relay Output to
Audio/Visual warning device
110~240 VAC
Input
Same access control power
supply board as is used in
EAP-5D1Q above.
3 3
Dimensions: 7"x4 /4"x1 /4"
(178x120x44 mm).
(Batteries not included)
Sample Application:
Specifications
Output voltage 12 or 24 VDC selectable via DIP switch
Input voltage 110~240 VAC
Adjustable output 11~15@12VDC setting, via VR switch
voltage range 23~26@24VDC setting, via VR switch
# of outputs 1
Supply current 5A@12VDC/4.5A@24VDC
AC input fuse rating 3.15A (glass fuse)
LED status indicator AC input (Green), DC output (Red)
End-of-line resistor (EOL) Selectable ON (2.2 k ) or OFF via DIP switch
AC-failure relay delay timer Selectable 5s, 5min or 5h via DIP switch
Supervision relays Contact rating: 3A@24VDC dry relay output
Ω
Accessory:
Access
32
1.949.261.2999 (CA & Int’l) 1.800.662.0800 Fax: 1.949.261.7326