Filter
Top Products
CANISTER
1. Open the canister hood.
2. Check to see that the dust bag isproper-
ly installed.See BAG CHANGING for
instructions.
3. Check to see that the motor safety filter is
properly installed. See MOTOR SAFETY
FILTER CLEANING for instructions.
HOOD
It is normal for the canister hood to come off
when opened further than needed. Line up
the hinges, insert them, and close the hood
to replace it.
HOSE
J
1. Line up the
hose latch tab
and notch in
canister hood
and insert hose
into canister until
it snaps in place.
To remove: lift
hose latch tab
upward and pull
up on hose.
Handle
Handle
Qu_k
Re_ase
_ome
2. Insert
handle into
wand until
lock button
snaps in
place. Be
sure hose
is not
twisted.
To remove:
press han-
dle release
button and
pull up on
handle.
To store: Disconnect hose from wands and
canister to prevent stress on hose during
storage, Store hose in a loosely coiled
position so the hose covering is not
stressed.
Cover
Hoodand_'_,,_
Attachment
Canister
Performance
IndlcetorLIght
(Some Models)
Performance
Indicator
(Some Models)
- DustBag
7