Filter
Top Products
Operating Humidifier Controls
The operating controls of your Kenmore
Quiet Comfort Whole House humidifier are
located on the top center of the humidifier.
The controls are found under the smoked
cover, located between the air circulating
fans. Lift the control cover by placing your
finger in the round cutout and lifting. The
cover will stay open. Now you can clearly
see the control area. Familiarize yourself
with the controls and reference the dia-
gram of the control area for the correct
naming used in this manual.
To Operate the Controls
Humidity Control:
Adjust the amount of humidity depending
on your needs. The humidifier will turn on
and off as required to maintain level of
humidity selected. MEDIUM setting is rec-
ommended, but there are times when low
or high amount of humidity may be pre-
ferred. For constant operation of humidi-
tier, MAX allows for the maximum amount
of humidity to be evaporated into the air
continuously.
IMPORTANT: Water damage may result if
condensation starts to form on windows
or walls. Humidity Control setting should
be lowered until condensation no longer
forms.
Power Light
When the unit is turned on, the power light
will come on. It will stay on until the unit is
turned off or unplugged.
Fill 't:i lht
When the unit has a small amount of
water left in it, the fill light will come on
and the unit will automatically shut off.
Speed Control
The unit is adjusted from "OFF" to high to
low with a variable speed control.
The higher the air flow speed, the more
water is evaporated and released into the
air. Low speed is the quietest and is pro-
vided for conditions that may not require
Fan Control
Your Kenmore Quiet Comfort Whole
House humidifier allows a choice to be
made for single or dual fan control. The
slide switch allows one or two fans to be
used. Slide the switch to the "1" position
to operate one fan and the "2° position to
operate both fans.
The benefits of two fans and two control
settings to the customer are summed up
in the name, "QUIET COMFORT WHOLE
HOUSE HUMIDIFIER". The "FAN" slide
switch, positioned in the #1 position will
operate the humidifier with one fan only in
any speed position and provides reduced
output at a lower noise level. The "FAN"
slide switch positioned in the #2 setting
will operate the humidifier with both fans
and provides greater output than the sin-
gle fan settings. Maximum output is pro-
vided by the humidifier in the #2 position
with the speed control set at high. This
allows an infinite number of fan/speed set-
tings, to determine the noise level and
out _ut level that best suits you.
QuietComfort13
HUMIDITYM_
MAX
OFF
SPEED
LOW
FANS
POWER
as.l_jh an evaporation rate.
7