Filter
Top Products
CARE OF YOUR COOLER
TAKING OFF PAD (Fig. 19)
1. Lift up the small roller ends to unsnap the two
center rollers Pull out the two small rollers
2. Pull out and turn the top roller bearing arm to
line up the slot
3+ Lift edge of pad from under the guide and pull
out the top roll end,
4, Take out the pad and bottom roller which will
slide out of the bottom slots.
CLEANING YOUR COOLER (FIG. 20)
HELPS PREVENT MINERAL BUILD-UP
_ NEVER WASH YOUR COOLER 1
'WITH A GARDEN HOSE. WATER
I MAY HARM THE MOTORS OR GET INTO
[YOUR HOUSE,
2,
3,
DISCONNECT THE ELECTRIC POWER AT
THE FUSE BOX,
Remove the Louvers., (See page 11)
Connect a garden hose to a water tray drain
fitting,, Unscrew and remove the overflow pipe
to drain the tray
4 Automatic cycling. BLEED--OFF KIT
available (Sears 32-62562)
NEVER DRAIN WATER ONTO A ROOF. I
WATER RESIDUE MAY CAUSE YOU TO SLIP I
OR MAY STAIN YOUR ROOF, USE A DRAIN 1
HOSE TO RUN WATER TO A RAIN GUTTER I
OR TO A DRAINL !
5+ Drain the other tray
6. Take off the pads if they are dirty or clogged
,
=
u
Use a sponge and mild detergent to wash the
dirt or scale from the trays and grilles. DO
NOT GET WATER ON THE PAD
MOTORS.
If the pads are clogged with hard water
deposits and dirt, replace the pads, See page
13
Put the overflow pipes and grilles in place (See
page 11)
f
f
t
k,
,%
J .,.
j '_.,
%
-" I
I i WATER
t+ , TRAY
...."_ / OVERFLOW
"_. .,.i I/ PIPE
I I
!
12