Filter
Top Products
SECTION 2 HOW YOUR WATER FILTER WORKS
I
2A.
I
FACE PLATE TIMER FEATURES
BACKWASH NOW
For times you expect to use more water than usual,
use the BACKWASH NOW feature. Press the
BACHWASH NOW-HOLD button [] and hold in for
3 seconds. RCHG begins to flash in the display and
a backwash starts right away. You will have filtered
water when the backwash is over in about 35
minutes.
_) PRESENT TIME AND DAY
_ BACKWASH DAY
SET!CLEAR
ONIOFF VACATION
HOLD BACKWASH NOW
VACATION -- The day you leave on vacation,
or other long absence, press (DO NOT HOLD IN)
the ON/OFF-VACATION button []. VAC begins to
flash in the display (FIG. 4). The timer will keep time,
but the filter will not backwash and waste water.
NOTE:
To shut off the water supply to the filter, use the
plumbing bypass valve(s)... FIG. 8, page 18.
When you return, press the VACATION button
again to return the filter to service, and the correct
time of day in the display. Remember to do this or
the filter will not backwash to keep the mineral
bed clean.
_ PRESENT TIME AND DAY
_ BACKWASH DAY
_ SET/CLEAR
_ ON/OFF VACATION
HOLD BACKWASH NOW
ERROR CODE
An error code could appear in the faceplate display
if a problem occurs in the filter elec- I
tronics. If you see an error code I !_-- _
instead of the present time of day, please call your
local Sears Service Department for service.
Continued
9