Filter
Top Products
1. All wiring must comply with local and national electrical
codes and be installed by a quatified electrician. If you
have any questions regarding the following
instructions, contact a qualified electrician.
2. Check available power supply and resolve any wiring
probtems BEFORE installation and operation of this
unit.
3. For your safety and protection, this unit is grounded
through the power cord plug when plugged into a
matching wall outtet. If you are not sure whether the
well cutters in your home are propedy grounded,
please consult a qualified electrician, DO NOT USE
PLUG ADAPTERS OR EXTENSION CORD_.
4. The manufacturers nameplate is located on the rear
panel of the unit and contains electrical and other
technical data specific to this unit.
5. To avoid the possibility of personal injury, always
diSConnect the power supply to the unit, before
installing and/or servicing.
Table I
Suggested Individual Branch Circuit
Nameplate Amps AWG Wire Size*
Dehumidifier 5.5 14
Heater 12,0
AWG- American Wire Gage
° Based on copper wire at 6O°C temperature rating.
Tab
Receptacle and Fuse Types
Rated' Volts _ 125
Amps 15
Wall Outlet
Fuse Size 15
Time Delay Fuse Plug Type
(or circuit breaker)
Dehumidifying Capacity
40 Pints (-19.0L/24 Hrs)
Etectdeal Requirements
Power input !wafts) Dehumidifier / Heating
Rated Amperage
• Dehumidi_ing
• Heatin9
Fan (wa e)
Air Flow Circulation [Cubic Feet per Minute)
Type of Refrigerant
Water Tank Capacity
Application Area CovereSe
Operating Noise Level
Unit Dimensions Width Depth Height
i
115 Volts 160 Hz
563 / 1150
5.5 emps
12.0 amps.
35.3
141
R22
6.3 litres.13.3 pints
269-378 sq. ft.
43dBA
14 3/8, X 143t4 " X 291/2"
Net Weight 21.5 kg / 47,3 Ib
....... ,, ,,
NOTE'. Specifications are subject to change without notice, tor further improvements.
4