Sears 437.83235 Air Cleaner User Manual


 
AIRINTAKEGRILLE- Dirtyairisdrawnin360° intothe
KenmoreHEPAAirGleaner,
AIROUTLET- AftertheairhasbeencleanedbytheHEPA
filter,it isdispersed_PWARDSintothesurrounding
atmosphere.
CARRYINGHANDLE- A convenienthandleisprovidedto
enableeasyrelocatiilnofyouraircleaner.
FILTERCHANGED&TECALENDARS- Twofilterchange
datewheelsarepro'_idedasaconvenientreminderwhen
to replacethepre-fil'_erandtheHEPAfilter.
SET-UP
Visually inspect the NEPA air cleaner upon removing the
I
unit from its box. Remove and discard any packaging
material. Return the un t if it shows any signs of damage or
mishandling. This urltt was thoroughly inspected and tested
at the factory prior t_ packaging.
i
Upon start up of YOUrKenmore HEPA Air Cleaner, set the
Pre-filter Change DcIe Calendar ahead 3 months and the
HEPA Change Date _alendar ahead 2 years to indicate
when the next fiter _p acement is necessary.
i
CAUTION; DO NOTp ace the a r c eaner within 3 feet of
any computer or anylmagnetically sensitive devices such
as floppy disks or tapes.
ELECTRICAL HOOK-UP
Plug the air cleaner into a polarized 120 Volt AC wall outlet.
WARNING
To avoid fire or shock hazard, the HEPA air cleaner should
only be plugged intqia polarized 120 Volt AC outlet.
NEVER operate the _EPA air cleaning system without the
HEPA filter propedy !i#stalled. Permanent motor damage
could result.
OPERATION
Each time the air cleaner is operated, turn the control
switch to the III (super) position for a fast initial cleaning for
a few seconds. Theei adjust the control switch to the
desired output setting:
III (super) - Maximur_ operation - fast initial cleaning
II (high) - Daytime o_eration - fast fan speed
I (low) - Night-time -quieter operation
Turn iONIZER switc_ ON.