Filter
Top Products
Prepare the Bobbin
= To Remove the Bobbin Case from the Machine
Remove the extension table from
the machine by pulling it to the
teft. Open the shuttle cover by
puliing down the embossed part on
the ]eft side of the cover,
Raise needle to its htghest position
by rotating hand wheel toward you.
To remove bobbin case from shut-
tie, pull open latch of bobbin case.
Pull bobbin case stra{ght out of
shuttie,
= Wind the Bobbin
SECTION 2. PREPARE THE MACHINE FOR SEWING
J
Release clutch by turning the
clutch knob inside the hand wheel
toward you to stop the needle from
moving while you wind the
bobb]n.