Filter
Top Products
Replace the Light Bulb Cleaning the Machine
i t
1. Unplug the machine and open the
face cover.
CAUTION!
The tight bulb will be
HOT, Protect your
fingers when you
handle it,
2.
3.
Push the bulb up and turn the
bulb counter-clockwise to remove
it.
Put the new bulb mbv pushing it
up and turning it clockwise.
To insure that your machine operates at its best, VOU need to keep the essential parts clean at all times.
The feed dogs and shuttle race areas can attract dust and lint. Your machine can become sluggfsh or knock loudly if a thread
Is caught.
Check and clean those areas about every three months under normal use.
If you sew frequently, clean more often.
NOTE: Unplug machine befor cleaning.
o Clean the Feed Dogs
Follow these direction :
1. Using a screw driver, remove 2. Use a lint brush and clean the feed
needle plate, dogs.
3. Reptace needle plate.
/
47