Sears 385. 1264180 Sewing Machine User Manual


 
Sew in a Zipper (Continued)
8. Open the zipper.
9, Lower the presser foot and stitch
the rest of the seam.
42
J
10, Close the zipper and turn the
fabric top side up.
INVISIBLE ZIPPER AND CORDING
INVISIBLE ZIPPER
Adiust the toot so the needle _ssewing through
the center hole ot the foot and one 8roove of
the foot ts riding on the teeth of the zipper as
shown. Follow the zipper manufacturer's inst-
ructfons, After zipper has been inserted, f_nish
sewing seam by shifting foot to side pos_tlon
sewing through side notch,
\
CORDING
Foot can also be used to make cording for slip*
covers etc, Cover a cord with 8 strip of b_as
fabric and sew as shown.
NOTE'.
Use "Low Bar Sewing Machine ZIPPER FOOT"
{6757) for "qnvlsib|e z_pper'" and "cording",
which can be obtained at any Sears retait store.
I1, To sew the right side of the zip-
per, set the zipper foot on the
right side of the needle.
12. Stitch across and below the bot-
tom of the z_pper.
13, Turn the corner and continue to
guide the foot along the zipper
teeth_ as shown,
Stitch through the fabric and
zipper tape,
14. Stop about 2" from the top of the
z!pper.
15, Lower the needle into the fabric
and raise the presser foot,
16, Remove the basting stitches and
open the ztpper.
17, Lower the foot and stitch the rest
of the seam, Make sure the fold Is
even.