Filter
Top Products
8. Open thezipper. 10. Close the zipper and turn the
9. Lower the presser foot and stitch fabric right side up.
the rest of the seam.
INVISIBLE ZIPPER AND CORDING
INVISIBLE ZIPPER
Adjust the foot so the needle is sewing through
the center hole of the foot and one groove of
the foot _sr_ding on the teeth of the zEpperas
shown. Follow the z_pper manufacturer's inst-
ructions. After z_pper has been inserted, fimsh
sewing seam by sh}ftmg foot to side position
sewing through side notch_
\
CORDING
Foot can also be used to make cording for slap-
covers etc. Cover a cord w_th a strip ot bias
fabric and sew as shown,
NOTE:
Use *'Low Bar Sewing Machine Z_PPER FOOT"
(6757) for "invisible zipper" and "cording",
which can be obtained at any Sears retait store,
11. To sew the right side of the zip-
per, set the zipper foot on the
rwght side of the needle.
12. Stitch across and below the bot-
tom of the zipper.
13. Turn the corner and continue to
guide the foot along the zipper
teeth, as shown.
Stitch through the fabrfc and
zipper tape.
14. Stop about 2" from the top of the
zipper,
t5. Lower the needle into the fabric
and raise the presser foot.
t6. Remove the basting stitches and
open the zipper.
t7. Lower the foot and stitch the rest
of the seam. Make sure the fold is
even.
38