Sears 153.335302 Water Heater User Manual


 
Materials Needed
To simplify the installation Sears has available the installa-
tion parts shown below. You may or may not need all of
these materials, depending on your type of installation.
: i i
i
WATER HEATER
INSTALLATION KIT WITH
FLEXIBLE CONNECTORS FOR
3/4" GALVANIZED OR
1/2"COPPER PLUMBING
COMPRESSION COUPLINGS
FOR CONNECTING TO
COPPER PLUMBING WITH-
OUT SWEAT SOLDERING
VENT ELBOW
EXPANSION TANKS FOR
THERMAL EXPANSION
CONDITIONS AVAILABLE
IN 2 GALLON AND 5
GALLON CAPACITY
THROUGH LOCAL SEARS
SERVICE CENTERES
VENT EXTENSION
WM_
FLEXIBLE WATER
HEATER GAS CON-
NECTOR WITH
FITTINGS
Wi_ P,4attr
Heat Tr_$
WATER HEATER HEAT TRAPS
HELP REDUCE HEAT LOSS DUE
TO THERMAL SYPHONING
WATER HEATER STAND 24"x24"x18"
FOR USE WITH WATER HEATERS INSTALLED
IN RESIDENTIAL GARAGES HAVING A DIAM-
ETER 24" OR LESS AND A RATED CAPACITY
75 GALLONS OR LESS
DRAIN PANS
AVAILABLE IN 20" DIAMETER FOR
WATER HEATERS HAVING A DIAMETER 18"
OR LESSAND AVAILABLE IN 28" DIAMETER
FOR WATER HEATERS HAVING A DIAMETER
26" OR LESS
Basic Tools
You may or may not need all of these tools, depending on
your type of installation. These tools can be purchased at
your local Sears store.
Pipe Wrenches (2) 14"
Screwdriver
Tin Snips
6 Foot Tape of Folding Rule
Garden Hose
Drill
Pipe dope or Teflon Tape
GARDEN HOSE 6 FOOT TAPE
_REWDRIVER
PIPE
WRENCH
PHILLIPS SCREWDRIVER.s..._
f(__ TIN SNIPS
ROLL OF TEFLON TAPE
(USE ONLY ON WATER
CONNECTIONS)
PIPE DOPE (SQUEEZE TUBE)
(USE FOR WATER AND GAS CONNECTIONS)
ADDITIONAL TOOLS NEEDED
WHEN SWEAT SOLDERING
Tubing Cutters or Hacksaw
Propane Torch
SoffSolder
Solder Flux
Emery_Cloth
Wire Brushes
HACKSAW
3/4" WIRE BRUSH
_BRUSH
ROLL OF LEAD FREE
SOFT SOLDER
ROLL OF EMERY
CLOTH
SOLDER FLUX
\
1
PROPANE TORCH
TUBING C(JTI'ER