Sears 1358 Sewing Machine User Manual


 
FEED COVER PLATE
There are a few times when you want to
control the feeding of the fabric yourself.
Raise needle to its highest position and raise
presser foot, Place feed cover plate over
needle plate aligning two pins of feed cover
plate with holes of needle plate. You may
then determine the movement of the fabric
yourself,
A B C
D E
F
PRESSER FEET
To change the various presser feet, raise the
presser bar to its highest position by lifting
the presser foot lever (See page 15). Loosen
the presser foot thumb screw, choose the
proper foot, insert from the front. Lower the
presser foot lever and tighten the screw using
the large screw driver to make certain the
foot is secure.
You have a variety of presser feet:
A. Zigzag Foot
B. Straight Stitch Foot
C. Satin Stitch Foot
D. Zipper Foot
E. Buttonhole Guide Foot
F. Buttonhole Foot
Applications are provided in appropriate
sewing section.
18