Sears 12781 Sewing Machine User Manual


 
SECTION 3. LEARN THE STITCHES
Overcast Stretch Stitching (Models 12781, 12681 and 12581)
Set the Machine
Stitch Stitch selector
Top thread tension Stitch length
control 1 to 4 control yellow
_ stretch stitch
position
L__J
Zigzag foot
Here's How
Place the raw edge of the fabric to
the LEFT of the needle as shown.
Stitch so the needle piercesthe fabric
just short of the outside edge.
Or, place your fabric to allow a 5/8"
seam, then trim seam allowance
Serging or Pine Leaf Stretch Stitchi_
Set the Machine
Stitch Stitch selector
Top thread tension Stitch length
control 1 to 4 control yellow
"_-_ stretch stitch
Zigzag foot
I (Models 12781 and 12681)
Here's How
Place the fabric under the presser
foot so that the stitches are made
over the edge.
Or, place your fabric to allow a 5/8"
seam, then trim seam allowance
after.
NOTE: Whe_.,_ _l'ete_--knit,
This stitch can be used for sewing a
seamwith an overcastfinish.
The seam is formed and finished in
one operation. It can be used when
you are making swimwear, ski pants
and other garments that require
stretch.
Use a blue stretch fabric
needle, which effectively
prevents skipped stitches.
raveling.
NOTE:
Use this stitch when you want a
narrow seam that you do not need to
press open flat. It is ideal for 1/4"
seams on knits or on medium to
heavyweight woven fabrics where you
want a narrow seam. It is also great
for making elastic swim wear.
effectively prevents
skipped stitches.
25