Filter
Top Products
Straight Stitches
• Straight Stitch
Set the Machine
Stitch Stitch selector
1
Top thread tension Stitch length
control 2 to 6 control orange
Straight foot Zigzag foot
1. Raisethepresser foot.
2. Raise the needle to its highest
position.
3. Place the edge of the fabric next
to a stitching guide line on the
needle plate (5/8" is most
common).
4. Draw the threads towards the
back and lower the presserfoot.
6. Hold the fabric loosely and gently
guide it along the guide line, so
that it feeds naturally.
Do not force the fabric or try to
pull it tight.
7.
8.
9.
!
At the end of the seam, you may
want to reverseto lock the stitch.
Raise the presserfoot and remove
the fabric.
Cut the threads.
SECTION 3. LEARN THE STITCHES
Use the Seam Guides
Cornering Guide
The seam guides on the needle plate
are there to help you measure seam
width_ The lines are I/8" apart, with
the 5/8" and 7/8" lines marked.
• Turn a Square Corner
To turn a square corner 5/8" from the
fabric edge:
1. Stop stitching and lower the
needle by turning hand wheel
toward you when the fabric edge
facing you lines up with the
cornering guide, as shown.
2. Raise the presser foot and turn
the fabric to line the edge with
the 5/8" seam guide.
3. Lower the presser foot and begin
stitching in the new direction.
17