Filter
Top Products
SECTION 2. PREPARE YOUR MACHINE FOR SEWING
Set Up the Machine
Plug in the Machine and Switch on the Power
NOTE:
Power supply plug
sPw°itwce_ Z _'_Power
Plu_l
connector
Machine
plug
J
Before inserting the plug into your
machine, be sure the power switch is
OFF.
Check your outlet to be sure it is a 110 to 120
Volt AC outlet.
2. Insert the machine plug into the three-prong
plug connector, as shown. It will only fit one
way.
3. Insert the power supply plug into the outlet.
light
4. Push the light and power switch to turn
on the power and sewing light.
SAFETY FEATURE:
Your machine will not operate unless the
light/power switch is turned on. If you are
interrupted or stop sewing, turn off the
light/power switch to prevent injury to
children.
• Foot Control Use
Foot control
The foot control regulates the speed at
which you sew.
To increase speed, gently press down with
the ball of your foot.
To decrease speed, release your foot pres-
sure slightly.
NOTE : The foot control is sensitive and
will increase or decrease your
sewing speed immediately.
Practice on a scrap of fabric to
regulate your sewing speed to
your taste and needs.