Sears 12581 Sewing Machine User Manual


 
SECTION 5. CARE FOR YOUR MACHINE
" Clean the Shuttle Race
This area must be kept free of dust, lint and occasional tangled thread. Clean the shuttle race area
about every three months.
Center pin of
the shuttle Shuttle driver
Lever
Lever
Lever
Bobbin
case
. To Clean the Shuttle Area:
1. Raise the needle bar to its highest
point and remove the bobbin case.
CevGr i
Shuttle
Shuttle Race
(Oil here)
Shuttle Race
Cover
To Replace Shuttle Assembly:
1. Position shuttle race as illustrated so that shuttle
driver is forming half moon on the left side of the
Z: -- :::c :ccc : [ ' t :_ :=::_ "C7C7 "
3. Clean the shuttle race with a lint to form a half moon on the rightside_ Pointed hook
brush, will be on the bottom.
4. Put a drop ot oil on the center pin of 3. Place shuttle race cover into place over shuttle
the shuttle and shuttle race. Do not assembly.
over-oil. 4. Snap the levers back into the original position.
37