Filter
Top Products
BC160P Standard
BC160L Less standard cylinder (For BC100 and B250-Series with Primus cylinder, specify this option and order
Primus cylinder separately.)
B250JD Prepared for full size interchangeable core, less core (For BC100 and B250-Series with Primus core, specify
this option and order Primus core separately.)
B250RD With full size conventional interchangeable core installed. Order control keys separately.
B250TD With full size (temporary) construction core installed. Order all keys separately.
B660BD Prepared for small format (Falcon, Best, etc.) interchangeable core (SFIC), less core.
B660GD With Everest B Family restricted keyway small format core installed. Order control keys separately.
B660HD With small format keyed brass (temporary) construction core installed. Order all keys separately.
B660BDC With small format disposable plastic construction core installed.
Door Handing
Schlage BC160 and B600/700/800-Series locks are non-handed.
B250-Series deadlatches are reversible. Hand information is only
necessary to ensure proper finish of latchbolt and strike for split-
finish locks. Follow the diagram to correctly determine the hand
of the door.
How to Order
To order Schlage products, descriptive data should be in the same sequence as shown.
Example
15
SERIES
B
LH
Left Hand
INSIDE
OUTSIDE
OUTSIDE
INSIDE
LRB
Left Hand
Reverse Bevel
RH
Right Hand
RRB
Right Hand
Reverse Bevel
Note: Schlage order forms are available at no charge by contacting your IR Security & Safety Consultant or Customer Service.
1 Line item number
2 Quantity
3 Complete model number with function and cylinder type
4 Outside finish.
5 Inside finish. Leave blank if same as outside.
6 Hand (Required only for split-finish locks)
7 Latch or bolt. Leave blank for standard or specify part number for optional latch or bolt. LLL=Less Latch.
8 Strike. Leave blank for standard or specify part number for optional strike. LLL=Less Strike.
9 Door thickness. For B-Series thick door applications, door must be extended equally.
10 Dimension for strike lip lengths. See strike page for availability of specific dimensions with specific strikes.
100 = 1 138 = 1⅜ 134 = 1¾
118 = 1⅛ 112 = 1½ 200 = 2
114 = 1¼
11 Additional details (e.g. key symbol, keyway, bitting) and other special requirements.
To order cylinder options, change “P” at the end of the model number as follows:
Line Outside Inside Door
Item Finish Finish Thickness
12 3 4 5 6 7 8 9 10 11
Product
Qty
Latch
Hand
Strike Additional Details
Dim
Line Outside Inside Door
Item Finish Finish Thickness
1 100 B660P 626 12-630 2” KA4
Product
Qty
Latch
Hand
Strike Additional Details
Dim