Filter
Top Products
Furnished with standard and round corner deadbolt strikes, this
reinforcer significantly strengthens a jamb against "kick-in"
attack and greatly increases the security of the lock. The
reinforcer is concealed under the strike and is anchored to the
jamb with two 3" long screws.
13
SERIES
B
Strikes
All B-Series strikes are fully reversible for right handed and left
handed doors and are furnished complete with screws. Strike
boxes are also included with all standard strikes. B-Series
deadbolt strikes are also packed with our exclusive wood frame
reinforcer for added protection against "kick-in" attack.
The rabbeted latch and strike kit adapts square corner latches
and strikes for ⅛" rabbeted door and frame preparations.
Finishes: 605 and 626 only.
Number Lip Length Description
10-001
1, 1¹⁄₈, 1¹⁄₄, 1¹⁄₂ 1¹⁄₈ x 2³⁄₄ Square Corner
1³⁄₁₆, 1³⁄₄
10-004 1¹⁄₈ 1¹⁄₈ x 2³⁄₄ Radius round corner
10-025 1³⁄₁₆, 1³⁄₈ 1¹⁄₄ x 4⁷⁄₈ ANSI
C603-623 — Box for T-strike
K510-066 — Box for ANSI strike
Strikes for Deadlatches
Standard Strike Strike Box
Drive-In Strike
Rabbeted Latch
and Strike Kit
39-030
3 Screws
(76mm)
Strike
Jamb
Stud
Wood Frame
Reinforcer
Wood Frame Reinforcer
37-016
Number Lip Length Description
10-055 — 1¹⁄₈ x 2³⁄₄ x ³⁄₃₂ Square Corner, B600/700/800
10-064 — 1³⁄₁₆ Circular drive-in
10-087 1³⁄₁₆ 1¹⁄₄ x 4⁷⁄₈ ANSI
10-092 1¹⁄₈ 1⁵⁄₈ x 2¹⁄₄ Radius round corner
10-094 — 1¹⁄₈ x 2³⁄₄ x ³⁄₃₂ Square Corner, BC100
10-095 1¹⁄₈ 1⁵⁄₈ x 2¹⁄₄ Full lip, no box
B250-283 — Box for standard strike
Strikes for Deadbolts
Thumbturn Assemblies and Inside Plate
B202-671
B250 without holdback
B220-004
BC160
12-617 for B660/760/860
12-618 for B663/763/863
12-626
B661/761/861
B202-672
B250 with holdback
(standard)