Filter
Top Products
Door Reinforcement
Schlage
®
37-001 reinforcing unit is used
to reinforce and help prevent the collapse
of hollow metal doors when locksets are
tightly mounted.
This kit should be used with long
backsets for AL-Series lock installations
in hollow metal doors to prevent lateral
movement of the latchbolt. Specify door
thickness, 1³⁄₈ (35mm) or 1³⁄₄ (44mm),
when ordering reinforcement kits.
SERIES
AL
Reinforcement Kit
37-001
A501-566
1³⁄₄
(44mm) Doors
A501-565
1³⁄₈ (35mm) Doors
Sleeve
Reinforcement
Door Prep
6
Latches
AL-Series latches are adjustable for flat or beveled edge doors.
Latches and strikes are furnished in brass, bronze, or chrome
finishes compatible with lock trim. When ordering separately,
specify quantity, part number, and finish.
Faceplate Hsg
Springlatch Deadlatch
Backset
Description Dia
¹⁄₂ (13mm) ¹⁄₂ (13mm)
Throw Throw
1 x 2¹⁄₄ (25mm x 57mm) ⁷⁄₈
11-068 11-085
square corner (22mm)
2³⁄₈ 1 x 2¹⁄₄ (25mm x 57mm) ⁷⁄₈
11-069 11-088
(60mm) ¹⁄₄ (6mm) radius rnd. cnr. (22mm)
1 (25mm) circular 1
11-110 11-104
drive-in (non-U.L.) (25mm)
1 x 2¹⁄₄ (25mm x 57mm) ⁷⁄₈
11-111 11-091
square corner (22mm)
1¹⁄₈ x 2¹⁄₄ (29mm x 57mm) 1
11-116 11-096
2³⁄₄
square corner, standard (25mm)
(70mm)
1 x 2¹⁄₄ (25mm x 57mm) ⁷⁄₈
11-112 11-092
¹⁄₄ (6mm) radius rnd. cnr. (22mm)
1 (25mm) circular 1
11-113 11-105
drive-in (non-U.L.) (25mm)
3³⁄₄ 1¹⁄₈ x 2¹⁄₄ (29mm x 57mm) 1
11-118 11-103
(95mm) square corner (25mm)
Latches
Used to convert 1 wide square front faceplates for 1⅛ wide
door preparations. Furnished in black plastic. Order in units of
100 each.
Long Backsets
Backsets 5 and over require extension links. AL-Series locks with
long backsets are normally furnished with 1 faceplates and ⅞
housings. Links installed in 1 latch holes require one G506-815
sleeve (order separately) to join latch and link. Backsets over 5
require an additional sleeve placed ⅛ from lock chasis.
Information on longer backsets is available upon request.
Square Corner Latches
Springlatch
Round Corner Latches
Springlatch
Drive-In Latches
Springlatch
Deadlatch
Deadlatch
Deadlatch
Latch Front Adapter
A501-878
5” Extension Link
41-005
(add to 2
3
/8˝ backset latch)
Sleeve
G506-815
(Order separately)