Number Description
01-054 SAT* Conversion kit: Driver, retainer, lever, core
01-025 SAT* Conversion kit: Driver, retainer, lever
01-126 Driver, retainer
51-022 SAT* Lever only (Saturn)
Interchangeable Core Components
Number Description
23-030 Conventional core
20-740 Primus high security core
Full Size Interchangeable Cores (For JD Suffix Locksets)
Full Size Core
Full Size IC Conversion
Driver
Insert
Lever
Core
Retainer
*Specify finish.
Available 606 and 626 finish only. Everest C123 keyway standard.
SERIES
AL
Number Description
80-036 7-Pin uncombinated Everest B Family restricted keyways
80-037 7-Pin combinated Everest B Family restricted keyways
80-043 6-pin uncombinated Falcon / Best keyways
80-033 7-pin uncombinated Falcon / Best keyways
M204-152 Disposable plastic construction core
Small Format Interchangeable Cores (For BD Suffix Locksets)
Small Format Core
Available 606 and 626 finish only. Specify keyway for existing systems.
80-033 and 80-043 cores are available in A, D, E, F, G, H, J, K, L, and M keyways.
80-036 and 80-037 restricted keyway cores require a letter of authorization from
the end user. Schlage assigns the keyway when establishing new Everest
restricted key systems.
5
IC Conversion Kits
For locks manufactured before June 2002 it is easy to convert
standard AL Series locksets to accept Schlage full size
interchangeable cores by changing the lever and adding the parts
shown.
Conversion of locks made since June 2002 and conversion of any
AL-Series lockset to SFIC requires different components, as well
as dismantling the lockset to replace internal parts. No kits are
available for this purpose.
IC Installation Tool
This tool is used to install the driver
and retainer for full size IC in the AL
Series and other Schlage cylindrical
locksets. Its other ends are designed to
install and remove mortise cylinder
housings and test mortise cylinder cam
action for both small format and full
size interchangeable core cylinders.
M504-413
(Order separately.)
Cores Only
Disposable Construction
Core