Filter
Top Products
4. Service procedures
1
2
3
4
Section
– 84 –
SM830076
d Set the No. of R. C. which you want to set with , ( ) button.
e Press the SET button.
UNIT No., CODE No. 12,
SETTING
and SET DATA (0002) change from flashing to ON state.
f Select the CODE No. 13 to set the indoor unit No. with the , (SET TEMP) button.
g Set the indoor unit No. which you want to set with the , ( ) button.
Ex. Indoor unit No. 4 will be set.
In this example, indoor unit address
(UNIT No.) will be set 2–4.
Ex. No. of R. C. will be set 2.
h Press the SET button.
UNIT No., CODE No. 13,
SETTING
and SET DATA (0004) change from flashing to ON
state.
SET CL
MODE
FAN SPEED
ON
OFF
•
•
SET TEMP.
UNIT
FLAP
AIR FLOW
R.C. No.
SET
UNIT No.
No.CODE
TIMER SET
DATA
SETTING
TEST / CHK
0369_M_I
SET CL
MODE
FAN SPEED
ON
OFF
•
•
SET TEMP.
UNIT
FLAP
AIR FLOW
R.C. No.
SET
UNIT No.
No.CODE
TIMER SET
DATA
SETTING
TEST / CHK
0370_M_I