Filter
Top Products
9
OI-212-09EG
Remote Control Unit
Sensor
Transmitter
Display
NIGHT SETBACK button
1 HR. TIMER button
MODE selector button
FLAP button
ADDRESS switch
(Cover closed)
ON/OFF operation button
Temperature setting buttons
FAN SPEED selector button
TIMER SELECT button
TIMER AND PRESENT TIME
setting buttons
PROGRAM button
ACL button
SENSOR button
Battery compartment
(Pull off the cover to expose the
batteries.)
NOTE The illustration above pictures the remote control unit after the cover has been
lowered and removed.
Transmitter When you press the buttons on the remote control unit, the mark
appears in the display to transmit the setting changes to the receiver in
the air conditioner.
Sensor A temperature sensor inside the remote control unit senses the room
temperature.
Display Information on the operating conditions is displayed while the remote control
unit is switched on. If the unit is turned off, only the mode that was set
previously is still displayed.
NIGHT SETBACK button For details, see “Night Setback Mode”. When you press this button in the
COOL or HEAT mode, the
mark appears in the display, and the remote
control unit automatically adjusts the set temperature to save energy.
Temperature setting Press the button to increase the set temperature.
buttons (TEMP.) Press the button to reduce the set temperature.
ON/OFF operation button This button is for turning the air conditioner on and off.
Timer and Present Time First, press the program button to select the mode you want.
setting buttons Each time you press the “HH” button, the hours advance by one.
Each time you press the “MM” button, the minutes advance by one.