Filter
Top Products
2
English
CAUTION
Do not install the setting plate in a location where the operating temperature for your
projector model may be exceeded. Such an environment may damage the projector.
Install the setting plate in a place free from excessive dust and humidity to prevent the
lens or optical components of the projector from becoming dirty.
Safety Instructions
The installation work should be performed by at least two qualifi ed service personnel.
If you need to loosen any screws during installation, be careful not to drop the setting
plate.
If mounting the projector on a wall with the setting plate, the wall must have enough
strength to hold the projector and setting plate. Confi rm the weight of the projector and
the setting plate before installation, and check the strength of the wall. If the wall is not
strong enough, reinforce the wall before installation.
Tighten all screws fi rmly after adjustment.
Inspect the setting plate on a regular basis to ensure there are no broken parts or loose
screws.
Install the setting plate to a vertical wall. Do not install to a leaning wall.
Do not install the setting plate in greasy or smoky place to prevent breakdown or abra-
sion of the projector’s components.
Do not install the setting plate in steamy, smoky or highly humid places in order to pre-
vent fi re or electric shock.
Do not use a setting plate with damaged parts. The projector or setting plate may fall and
cause personal injury or property damage.