Filter
Top Products
9
Attach the drop-prevention wire to the projector
To prevent the projector from falling down, use the included drop-prevention wire to connect the projector
and the setting plate.
1
Pass the included drop-prevention wire through the drop-prevention
wire installation bar of the projector as shown in the illustration.
2
Pass the wire through the holes of the setting plate as shown in the il-
lustration.
3
Secure the end of the wire at the bottom of the setting plate with the
screw (M4 x 10) supplied with the setting plate as shown in the illustra-
tion.
Drop-prevention wire
Screw (M4 x 10)
Drop-prevention wire installation bar