Filter
Top Products
Remote Control Unit
NOTE
The illustration above pictures the remote control unit after the cover has
been lowered and removed.
Transmitter When you press the buttons on the remote control unit, the mark
appears in the display to transmit the setting changes to the receiver in
the air conditioner.
Sensor A temperature sensor inside the remote control unit senses the room
temperature.
Display Information on the operating conditions is displayed while the remote
control unit is switched on. If the unit is turned off, only the mode that
was set previously is still displayed.
NIGHT SETBACK button For details, see ‘‘Night Setback Mode’’. When you press this button in
the COOL mode, the
mark appears in the display, and the remote
control unit will automatically adjust the set temperature to save energy.
TEMP. setting buttons Press the
button to increase the set temperature.
Press the
button to reduce the set temperature.
ON/OFF operation button This button is for turning the air conditioner on and off.
Timer setting buttons First, press the PROGRAM button to select the mode you want.
Each time you press the ‘‘HH’’ button, the hours advance by one.
Each time you press the ‘‘MM’’ button, the minutes advance by one.
AIR CONDITIONER
Transmitter
Display
ON/OFF operation button
FLAP button
TEMP. setting buttons
1 HR. TIMER button
NIGHT SETBACK button
MODE selector button
Battery compartment
(Slide the cover to expose the
batteries.)
FAN SPEED
selector button
ACL button
Program button
A/C SENSOR button
Timer setting buttons
ON I /OFF
1HR.
TIMER
TEMP.
MODE
FLAP
FAN SPEED
SELECT
HH
TIMER
SELECT
MM
TIME SET
NIGHT
SETBACK
BATTERIES
ACL
A/C
SENSOR
OFF ON
CLOCK
AIR CONDITIONER
ON OFF
HR.
F
SET TEMP
1
AM
PM
A
(Cover closed)
Sensor
TIMER SELECT button
9OI-201-09EG