Filter
Top Products
Operation with the Remote
Control Unit
1. Operation
NOTE
Check that the circuit breaker on the power panel is turned on and that the
operation selector of the indoor unit is in the ON position.
Press the setting buttons as described below and change the settings as
desired.
STEP 1 Set the MODE selector button to COOL.
For cooling operation →
STEP 2 To start the air conditioner, press the ON/OFF operation
button.
STEP 3 Press the TEMP. setting buttons to change the
temperature setting to the desired temperature.
Adjustable temperature range:
88 °F max.
60 °F min.
STEP 4 Set the FAN SPEED selector button to the setting you
want.
NOTE
If the fan speed is set to (Automatic), the fan
speed switches automatically, according to the
difference between the actual room temperature and
the temperature setting.
STEP 5 Press the FLAP button and set the airflow direction as
desired.
(Refer to ‘‘Adjusting the Airflow Direction’’ on page 20.)
To stop the air conditioner, press the ON/OFF operation button again.
ON I /OFF
1HR.
TIMER
TEMP.
MODE
FLAP
FAN SPEED
SELECT
HH TIMER
SELECT
MM
TIME SET
NIGHT
SETBACK
BATTERIES
ACL
A/C
SENSOR
OFF ON
CLOCK
AIR CONDITIONER
HR.
1
A
1
AM
F
STEP 5
STEP 1
STEP 4
STEP 3
STEP 2
13OI-201-13EG