Filter
Top Products
Operation with the Remote
Control Unit
1. Automatic Operation
NOTE
Check that the circuit breaker on the power panel is turned on and that the
operation selector of the indoor unit is in the ON position.
When Automatic operation mode
is selected and the unit is set using the
steps below, the air conditioner operates automatically and brings the room
to the desired temperature simply by pressing the ON/OFF operation
button.
STEP 1 Press the MODE selector to .
STEP 2 Press the ON/OFF operation button.
To stop the air conditioner, press the ON/OFF operation button again.
NOTE
•
To change the temperature setting, press the temperature setting
buttons and change the setting to the desired temperature.
The
indicates the upper limit for the temperature setting and the
indicates the lower limit.
13OI-212-13EG
oi212001
STEP 2
STEP 1
•
The temperature setting changes by two degrees each time one of the
TEMP. buttons is pressed.
•
Although the fan speed is set automatically, you can change the fan
speed by pressing the FAN SPEED selector button as shown below.