Filter
Top Products
troubleshooting _15
04 TROUBLESHOOTING
troubleshooting
PROBLEM SOLUTION
Motor does not start
• Check the cable, plug, and socket.
• Let cool.
Suction force is gradually
decreasing
• Check for a blockage and remove.
Cord does not rewind
fully
• Pull the cord out 2-3m (6.5 - 9.75 ft.) and push the cord
rewind button.
Vacuum cleaner does not
pick up dirt
• Check the hose and replace if necessary.
Low or decreasing
suction
• Please check the fi lters and, if needed, clean as illustrated
in the instructions. If the fi lters are clogged and cannot be
cleaned, replace with new ones.
Body overheating
• Please check the fi lters. If needed, clean as illustrated in the
instructions.
Static electricity
discharge
• Please decrease power suction.
• This can also occur when the air in the room is very dry.
Please ventilate the room to increase the humidity.